When a board is selected, STM32CubeMX allows automatically the pinout setting for the board with the pin assignments for the communication interfaces, LEDs, and other functions. The corresponding pins PA13 and PA14 are assigned and configured automatically. Verify in Pinout tab, under SYS peripheral, that Serial Wire is selected as Debug interface: Answer Yes Initialize all peripherals with their default Mode ? popup.Select NUCLEO-L476RG board using Board selector:.From Board Selector section, filter to select and use NUCLEO-L476RG board:.Click New Project or Menu -> File -> New Project.5 Configure project and generate source code.In this tutorial, we explain step-by-step how to blink a LED on the NUCLEO-L476RG board, using the STM32CubeMX tool, HAL, and STM32CubeIDE. How to build a “Blink LED” project from STM32CubeMX for ST/Atollic TrueSTUDIO® for STM32.UM1718 User manual STM32CubeMX for STM32 configuration and initialization C code generation.UM1884 Description of STM32L4/L4+ HAL and low-layer drivers.UM1724 User manual STM32 Nucleo-64 boards.The hardware requirements to start the application are the following: Previous Tutorial: Step1: Tools Installation and First test.program and use HAL functions to blink a LED on the NUCLEO-L476RG board.create and configure the STM32CubeMX project and generate the initialization code.This tutorial shows how to use the STM32CubeMX tool to initialize the peripherals, build and generate your starting projects with the initialization C code using HAL libraries.Īfter this tutorial, you should be able to: Blinking LED with STM32CubeMX and HAL 30min
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |